Standard samples

Several standard samples used by the Facility, along with their concentrations, masses and number of moles in 5 and 1.7 mm tubes, are listed below.

Spectra recorded using these samples and the Facility's standard parameters are available on both our instruments. If you know how much sample you have you can use these spectra as a guide to how long your experiment should take. If you don't know how much material you have, you can estimate it by comparing spectra recorded on your sample with the spectra recorded on the standard samples.

The column "Expno" refers to the experiment number under the experiment name where you can find the spectrum. For example, "/home/nmrsu/Data/UCSD_1H/3" will have a 1D 1H spectrum of the o-dichlorobenzene sample, while "/home/nmrsu/Data/UCSD_13C_HSQC_PRESAT/2" will have a 1H-13C HSQC spectrum with presaturation of the sucrose sample.

Expno Sample Concentration Mass in
5 mm tube
Mass in
1.7 mm tube
Nanomole in
5 mm tube
Nanomole in
1.7 mm tube
1 100 mg/ml Cholesteryl acetate 233.26 mM 50,000 μg 4,000 μg 116,631 nmol 9,330.5 nmol
2 2 mM Sucrose 2.0 mM 342.30 μg 27.38 μg 1,000.0 nmol 80.000 nmol
3 5% o-Dichlorobenzene 0.444 mM 32.65 μg 2.61 μg 222.09 nmol 17.768 nmol
4 1% Chloroform 0.135 mM 3.92 μg 0.31 μg 67.54 nmol 5.403 nmol
5 0.1% Ethylbenzene 0.008 mM 0.43 μg 0.03 μg 4.06 nmol 0.325 nmol

Written by Brendan Duggan. Last modified 2022-Jul-22